+---------------------------------------------------------------------------------------------------------------------+
|  ESP-01S 1MB module / Sonoff Basic  ---  bluesonoff                                                                 |
+---------------------------------------------------------------------------------------------------------------------+
|  Rails: 5V, 3V3, GND                                                                                                |
|                                                                                                                     |
|  front_button  [Generic GPIO binary sensor]  -- Soffit Outlet Switch                                                |
|    IN    -> GPIO0                                                                                                   |
|                                                                                                                     |
|  soffitoutlets  [Generic GPIO switch / relay output]  -- Soffit Outlets                                             |
|    OUT   -> GPIO12                                                                                                  |
|                                                                                                                     |
|  BOM:                                                                                                               |
|    - ESP-01S 1MB module / Sonoff Basic                                                                              |
|    - Generic GPIO binary sensor  (front_button)                                                                     |
|    - Generic GPIO switch / relay output  (soffitoutlets)                                                            |
|                                                                                                                     |
|  Power: ~0mA typical, ~0mA peak (budget 250mA)  OK                                                                  |
|                                                                                                                     |
|  Warnings:                                                                                                          |
|    [warn] strap_pin_used_as_button: GPIO0 is a strap pin (must be HIGH at boot to enter normal mode). Sonoff Basic  |
|                                     ties it through the front button to 3V3 with a pull-up; pressing the button at  |
|                                     boot WILL force flash mode. Acceptable on a deployed device, but not flexible.  |
|    [info] status_led_in_extras: ESPHome's status_led is a singleton platform with no library entry yet -- lives     |
|                                 in esphome_extras.                                                                  |
+---------------------------------------------------------------------------------------------------------------------+
