$
kiln emergency-stop
--printer voron-350
--reason thermal_runaway
⚠ EMERGENCY STOP voron-350
Actions: M112 → heaters off → steppers disabled
Latch: ACTIVE — persists across restarts
$
kiln start-print
--file benchy.gcode
✗ Blocked: E-stop latched for voron-350.
Clear with emergency-clear
$
kiln printer-trend-analysis
--printer ender3-v2
◆ Trend Report ender3-v2 · 30 days
Health: 0.38
CRITICAL
Trend: worsening
(72% → 48%)
·
Top failure: warping ×5
⚠ Duration increasing: avg 2.1h → 3.4h. Possible clogging.
$
kiln check-ambient
--printer bambu-x1c
--material PLA
🌡 Ambient bambu-x1c
·
chamber: 52°C
⚠ Too hot for PLA (softens above 45°C — still warm from ABS job)
↳ Wait for cooldown or open enclosure before printing.